01
Tile adhesives
Application-specific fixing materials for ceramic, vitrified and larger-format tiles. The appropriate choice depends on tile type, size, substrate, location and exposure.
Ezy Fix solutionsSomany Ezy Fix · Tile installation systems
Tile Adhesive, Grouts & Ezy Fix Solutions in Bikaner
Compare Somany Ezy Fix tile adhesives—from PU and SEF 333 to SEF 888 Grande—plus grouts, epoxy, tile cleaner and admixtures at The Build Mart, Bikaner.
Beyond the tile surface
A lasting tile installation is a complete system.
The visual quality of a tiled space depends on more than the tile itself. The substrate, adhesive bed, joint treatment, workmanship and cleaning process all influence alignment, bond and the final appearance.
At The Build Mart, Bikaner, we primarily deal in Somany Ezy Fix tile adhesives, grouts, tile cleaner, epoxy and admixtures. The official adhesive portfolio spans eight distinct levels—from PU Adhesive and SEF 333 through SEF 888 Grande—so customers, contractors and project professionals can discuss the installation requirement alongside the chosen tile.
Product grades and technical suitability vary. Final selection and application must follow the current Somany Ezy Fix product label, technical data and site conditions, with installation carried out by a qualified applicator.
The Ezy Fix range
Five parts of a better-finished surface.
Select by tile, substrate and exposure—not by a single all-purpose assumption. Current variants and availability should be confirmed for each project.
02
Cementitious grouts
Joint-filling solutions that complete the tiled surface. Select colour, joint width and product type around the tile, room conditions and cleaning expectations.
03
Epoxy solutions
High-performance jointing and finishing options considered where stain resistance, low absorption, hygiene or demanding use is important. Suitability varies by application.
04
Tile cleaner
Purpose-made cleaning support for suitable tile surfaces and installation stages. Always follow the current label instructions, dilution guidance and compatibility precautions.
05
Admixtures
Supporting additives intended for specified installation or repair requirements. Use only where recommended and in the stated proportion for the selected system.
Official Somany adhesive portfolio
Match performance to the installation.
The range progresses from straightforward dry-interior fixing to renovation, façades, wet areas, submerged surfaces and extra-large formats exposed to movement.
Dry interiorTile-on-tileExterior verticalWet & submergedExtra-large & movement
01Two-component PU
PU Adhesive
Special substrates & water-sensitive materials
A flexible, water-free system for ceramic, vitrified, glass, metal and natural stone on suitable absorbent, non-absorbent or movement-prone substrates.
02C1T · Type 1
SEF 333
Dry interior ceramic tiling
For ceramic wall and floor tiles, plus smaller vitrified floor tiles, over properly prepared cementitious substrates in dry interiors.
03C2T · Type 2
SEF 444
Interior vitrified & tile-on-tile
A higher-performance interior option for ceramic and vitrified tiles, including suitable tile-on-tile renovation applications.
04C2TE · Type 2
SEF 666
Large-format walls & façades
Extended-open-time fixing for large-format ceramic or vitrified tiles and natural stone on interior and exterior vertical work, including demanding hot-weather installations.
05C2TE · Type 3
SEF 666 Plus
Demanding vertical installations
A stronger wall and façade option for large-format tiles and stone across suitable interior, exterior and elevated-temperature conditions.
06C2TES1 · Type 3 TS1
SEF 777
Wet areas, pools & exterior walls
A flexible fixing system for large-format tiles and stone on suitable interior floors and walls, exterior walls, washrooms and swimming-pool applications.
07C2TES1 · Type 4 TS1
SEF 888
Movement-prone & submerged areas
A highly fortified option for large-format tiles and stone where exterior exposure, vibration, deformation, fountains, pools or submerged conditions increase performance demands.
08C2TES2 · Type 4 TS2
SEF 888 Grande
Extra-large formats & high-stress use
An ultra-flexible system for extra-large tiles and stone over substrates exposed to movement or vibration in demanding residential, commercial or industrial work.
Specification note: Classifications, applications and pack sizes above summarise current Somany manufacturer information. Grey or white availability varies by grade and stock. Confirm the latest technical data sheet, substrate preparation, tile or stone compatibility, pack availability and application method before ordering or installation.
Choose the system
Four questions before the first bag is opened.
01
Tile body & format
Ceramic, vitrified and large-format tiles place different demands on the fixing bed.
02
Substrate
A stable cementitious base, old tile, screed or another approved surface may require a different preparation and adhesive.
03
Location
Interior floors, walls, bathrooms, balconies and exterior areas face different moisture, heat and movement conditions.
04
Joint finish
Grout type and colour affect visual continuity, cleaning, water exposure and the finished character of the layout.
Installation sequence
Plan every layer before laying the first tile.
01
Prepare
The substrate should be stable, clean, properly cured and suitable for the selected system.
02
Fix
Mix and apply the chosen adhesive using the stated water ratio, trowel and coverage method.
03
Joint
Allow the required setting time, then fill clean joints with the compatible grout or epoxy system.
04
Clean & protect
Remove residues with suitable methods and protect the installation during curing and following trades.
Practical guidance
Details that protect the finished work.
Do not assume one adhesive suits every tile size or substrate.
Confirm the approved application thickness and coverage method.
Use compatible materials across preparation, fixing and jointing.
Select grout colour using an actual tile sample whenever possible.
Test cleaners on a discreet area and follow dilution instructions.
Keep batch details and technical information for project records.
Common questions
A more informed fixing decision.
These answers help narrow the conversation. Your applicator and the latest Somany technical guidance should determine the final system.
01Which Somany Ezy Fix adhesive should I choose?+
Selection depends on the tile or stone, its format, the substrate, whether the work is on a floor or wall, and exposure to heat, moisture, movement or submersion. Bring these project details to The Build Mart so the range can be compared against the current manufacturer guidance.
02Can Somany Ezy Fix be used for tile-on-tile renovation?+
Somany identifies SEF 444 for suitable interior tile-on-tile applications. The existing surface must still be assessed and prepared correctly, and the current product data sheet should be followed.
03Which grades are intended for exterior walls and large-format tiles?+
Somany positions SEF 666, SEF 666 Plus, SEF 777, SEF 888 and SEF 888 Grande across progressively more demanding large-format, exterior, flexible and high-movement uses. Exact suitability depends on the tile, height, substrate and site conditions.
04Which Ezy Fix products are considered for wet or submerged areas?+
The manufacturer lists SEF 777 and SEF 888 for relevant wet or submerged applications, with SEF 888 suited to more demanding movement and exterior conditions. Waterproofing, joints and the complete installation specification must also be planned.
05Do all Ezy Fix adhesives have the same colour and pack size?+
No. Somany lists PU Adhesive in 4 kg and 8 kg packs, while the cementitious SEF ranges are commonly shown in 20 kg and 40 kg packs. Grey or white variants and local stock can differ by product, so confirm current availability before purchase.
Somany tiles + Ezy Fix
Coordinate the visible surface with what supports it.
Visit our Somany Arcade to compare ceramic and vitrified tiles at room scale, then discuss the suitable Ezy Fix adhesive, joint finish and care products at The Build Mart. Tile selection and installation planning become one connected decision.
Explore Somany ArcadeSee the complete system in Bikaner
Bring your tile details. Leave with a clearer installation plan.
12 Km Milestone, NH-11, Jaipur Highway, Raisar, Bikaner